Konica-Minolta bizhub C35
Troubleshooting. Jam 02. Misfeed at fusing/paper exit section
Detection timing
Type | Description |
---|---|
Detection of misfeed at fusing/ paper exit section | • The exit sensor (PS8) is not blocked even after the lapse of a given period of time after the paper has unblocked the exit sensor (PS8). |
• The exit sensor (PS8) is blocked even before the lapse of a given period of time after the paper has unblocked the exit sensor (PS8). | |
Detection of paper left in fusing/paper exit section | • The exit sensor (PS8) is unblocked when the power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Exit sensor (PS8)
Duplex conveyance roller clutch (CL13)
Printer control board (PRCB)
Main motor (M2)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | Check the connector between M2-PRCB PJ6 for proper connection and correct as necessary. | ||
3 | Check the M2 connector for proper drive coupling and correct as necessary. | ||
4 | Check the connector between PS8-PRCB PJ9 for proper connection and correct as necessary. | ||
5 | Check the connector between CL13-relay CN20-PRCB PJ16 for proper connection and correct as necessary. | ||
6 | PS8 sensor check | PRCB PJ9-9 (ON) | I-15 |
7 | CL13 operation check | PRCB PJ16-15 (REM) | C-7 |
8 | M2 operation check | PRCB PJ6-3 to 6 | C-15 |
9 | Change PRCB. |