Konica-Minolta bizhub C35

Clear Admin Password

Use

• To initialize the administrator password (Default value: 12345678).
• Use this function when the administrator forget the administrator password.

NOTE
• If the administrator password is initialized, after the initialization, immediately ask the administrator for a new administrator password and change the default value to the new password.

Procedure

1. Call the Service Mode to the display.
2. Touch [Clear Admin Password].
3. Touch [OK] on the confirmation screen to initialize the administrator password.

CE Password

Use

• To set and change the CE password.

Procedure

1. Call the Service Mode to the display.
2. Touch [CE Password].
3. Touch [Password] of the upper section, and enter the 8-digit new CE password using the screen key board or the 10-key pad.
4. Touch [Password] of the lower section, and reenter the 8-digit new CE password using the screen key board or the 10-key pad.

NOTE

• If Password Rules of Security Settings available from Admin Settings is set to “ON,” the machine does not accept any new password that contains only the same character, consists of less than 8 digits, or that is the same as the previous password.
• In the CE password change display, enter the same CE password to the entry areas (upper and lower).
• For the CE Password, set a value other than the default. • Quitting the Service Mode after the new password has been set will validate the setting of the new password.
• NEVER forget the CE password. When forgetting the CE password, call responsible person of KMBT.