Konica-Minolta bizhub C300
Troubleshooting. Jam 06. Misfeed at manual bypass feed section
Detection timing
Type | Description |
---|---|
Detection of misfeed at manual bypass feed section | The leading edge of the paper does not block the registration roller sensor (PC1) even after the lapse of a given period of time after the bypass paper feed clutch (CL5) has been energized. |
Manual bypass feed section loop registration reversing jam | Rise timing of load for registration is earlier than the one for making the loop at front of the registration roller at bypass feed. |
Relevant electrical parts
Registration roller sensor (PC1)
Bypass paper feed clutch (CL5)
Mechanical control board (MFPB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PC1 I/O check, sensor check | MFPB CNSEN-3 (ON) | C-3 |
3 | CL5 operation check | MFPB CNTRY1-2 (ON) | C-8 |
4 | Change MFPB |