Konica-Minolta bizhub C250P

*1: Available only when Internet ISW is enabled on the Jig software
*2: Unavailable when Data Capture is prohibited on the utility mode

Tech. Rep. Mode
Ready to Print
Job Operation
Paper Tray
User Setting
Admin. Setting (Password)
Tech. Rep. Mode (Password)	Counter Reset
	Running Mode
	Option Board
	List Output
	Serial Number
	Image Controller	Image Controller
		Peripheral Mode
	Unit Change
	LCT Paper Size
	Initialization
	Foolscap Size
	No Sleep
	Security Setting	Admin. Password
		Service Password
	HDD Formatting
	Version Upgrade	HDD Ver. Upgrade
		HD Ver. Downgrade
		Internet ISW *1
	Data Capture *2
	Data Backup
	Software SW	Switch No.
		Bit Assignment
		HEX Assignment
	Comm. System
	CS Remote Care	System Selection
		ID Code
		Detail Set: Mail	Center/Device ID	Center ID
				Device ID
			E-Mail Address
			Data/Time
			RAM Clear
			Log Print
	CS Remote Care	Detail Set: Mail	Software SW	Switch No.
				Bit Assignment
				HEX Assignment
			Response Timeout
		Detail Set: Modem	Center/Device ID	Center ID
				Device ID
			Center Tel No.
			Device Tel No.
			Data/Time
			Initial Trans.
			RAM Clear
			Log Print
			Software SW	Switch No.
				Bit Assignment
				HEX Assignment
			Reset Command
		Server Setting	Server for RX	POP3 Server
				POP3 Login Name
				POP3 Password
				POP3 Port Number
			Receive Setting	E-Mail Address
				E-Mail Check
				Connect Timeout
				APOP
			Send Setting	SMTP Server
				SMTP Port Number
				Connect Timeout
				Auth. Setting
			TX/RX Test
			Data Initialize