Konica-Minolta bizhub C227
Troubleshooting. Jam Codes: 13-01, 13-40
Contents
| JAM type | Misfeed at tray 3 feed section |
| JAM code | 13-01, 13-40 |
| JAM detection timing | 13-01 The leading edge of the paper is not turned ON the tray 3 vertical transport sensor (PS113) even after the lapse of a given period of time after the tray 3 starts to feed paper. |
| 13-40 For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
|
| Paper jam of a sheet of paper left at the tray 3 feed section results, if the tray 3 vertical transport sensor (PS113) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
| Paper jam of a sheet of paper left at the tray 3 feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
| Misfeed processing location | • Right door • Tray 3 |
| Relevant parts | • Tray 3 paper feed motor (M111) • Tray 3 vertical transport motor (M112) • Tray 3 vertical transport sensor (PS113) • PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial check items | ||
| 2 | PS113 I/O check, sensor check | PCCB CN4-14 (ON) | PC-114/PC-214 5-C |
| 3 | M111 operation check | PCCB CN5-1 to 8 | PC-114/PC-214 4-C |
| 4 | M112 operation check | PCCB CN5-9 to 16 | PC-114/PC-214 3 to 4-C |
| 5 | Replace PCCB. |