Konica-Minolta bizhub C220
Service Mode. Function tree 2
✽ The function tree is shown to comply with the format displayed on the screen.
Service Mode | |||
---|---|---|---|
System 1 | Marketing Area | ||
Tel/Fax Number | |||
Serial Number | |||
No Sleep | |||
Foolscap Size Setting | |||
Original Size Detection | |||
Install Date | |||
Initialization | Clear All Data | ||
Clear Individ- ual Data | Copy Program Data | ||
Address Registration Data | |||
Fax Setting Data | |||
All History Data | |||
Network Setting Data | |||
System Error Clear | |||
Trouble Isolation | |||
Post card transfer table | |||
Change Warm Up Time | |||
Machine State LED Setting | |||
System 2 | HDD | ||
Image Controller Setting | |||
Option Board Status | |||
Consumable Life Reminder | |||
Unit Change | |||
Software Switch Setting | |||
Scan Calibration | |||
LCT Paper Size Setting | |||
Line Mag Setting | |||
Data Capture | |||
Split Line Detect. Setting | |||
Stamp | |||
Network Fax Settings | |||
Image Stabilization Setting | |||
User Paper Settings | |||
Coverage Rate Screen | |||
JAM Code Display Setting | |||
Boot up Screen | |||
Install Data | |||
Bluetooth Settings |
*1: It will be displayed only when the optional fax kit (FK-502) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-527) is mounted.
*4: It will be displayed only when the optional finisher (FS-527/529) is mounted.
*5: It will be displayed only when the optional finisher (FS-529) is mounted.
*6: It will be displayed only when the optional separator (JS-505) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”