Konica-Minolta bizhub C220
Service Mode. Function tree 1
✽ The function tree is shown to comply with the format displayed on the screen.
Service Mode | ||
---|---|---|
Machine | Fusing Temperature | |
Fusing Transport Speed | ||
Org. Size Detecting Sensor Adj. | ||
Printer Area | Leading Edge Adjustment | |
Centering | ||
Leading Edge Adj. (Duplex Side 2) | ||
Centering (Duplex 2nd Side) | ||
Paper Feed Direction Adj. | ||
Tray Printing Position: Tip | ||
Scan Area | Image Position: Leading Edge | |
Image Position: Side Edge | ||
Cross Direction Adjustment | ||
Feed Direction Adjustment | ||
Printer Resist Loop | ||
Color Registration Adjustment | ||
Exhaust Fan Stop Delay | ||
Skew adjustment | Skew adjustment | |
Skew adjustment reset | ||
Manual Bypass Tray Adjustment | ||
Lead Edge Erase Adjustment | ||
Split Line Prior Detection | ||
Non-Image Area Erase Check | ||
Firmware Version | ||
Imaging Process Adjustment | Gradation Adjust | |
D Max Density | Copy | |
Printer | ||
Background Voltage Margin | ||
Transfer Output Fine Adjustment | Primary transfer adj. | |
Secondary transfer adj. | ||
Stabilizer | Stabilization Only | |
Initialize+Image Stabilization | ||
Imaging Process Adjustment | Thick Paper Density Adjustment | |
Paper separation adjustment | ||
TCR Toner Supply | ||
Monochrome Density Adjustment | ||
Development AC Voltage Choice | ||
CS Remote Care |
*1: It will be displayed only when the optional fax kit (FK-502) line 1 is mounted.
*2: It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
*3: It will be displayed only when the optional finisher (FS-527) is mounted.
*4: It will be displayed only when the optional finisher (FS-527/529) is mounted.
*5: It will be displayed only when the optional finisher (FS-529) is mounted.
*6: It will be displayed only when the optional separator (JS-505) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”