Konica-Minolta bizhub C10
Troubleshooting. Jam 04. Misfeed at fusing section
Detection timing
Type | Description |
---|---|
Detection of misfeed at fusing section | The paper does not block the exit sensor (PS7) even after the lapse of a predetermined period of time after the registration roller solenoid (SD2) has been energized. |
The exit sensor (PS7) is unblocked within a predetermined period of time after it has been blocked by the paper. | |
The main motor, polygon motor, and rack motor are energized even after the lapse of a predetermined period of time after paper information has been created. | |
Detection of paper left in fusing section | The exit sensor (PS7) is blocked when the power switch is turned ON, a cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Exit sensor (PS7)
Registration roller solenoid (SD2)
Printer control board (PRCB)
Image processing board (IPB)
Action
M3 operation check M3 operation checkStep | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | Check the IPB connector for proper connection and correct as necessary. | ||
3 | Check the PRCB connector for proper connection and correct as necessary. | ||
4 | PS7 sensor check. | PRCB PJ6PRCB-3 (ON) | C-7 |
5 | SD2 operation check. | PRCB PJ11PRCB-4 (REM) | J to K-1 |
6 | Change IPB. | ||
7 | Change PRCB. |