Konica-Minolta bizhub 958

3.12 Replace eMMC board

Procedure	Replacement part/Service job	Adjustment/setting items
1	Replace eMMC board	Installing the firmware

NOTE Contact Konica Minolta technical support if the eMMC board needs to be replaced.

3.13 Replace original glass assy

Procedure	Replacement part/Service job	Adjustment/setting items
1	Replace original glass assy	[Service Mode] / [Machine] / [Scan Area] / [Scanner Image Side Edge]
2		[Service Mode] / [Machine] / [Scan Area] / [Image Position: Leading Edge]

3.14 Replace hard disk

Procedure	Replacement part/Service job	Adjustment/setting items
1	Replace hard disk	[Service Mode] / [State Confirmation] / [Memory/Storage Adjustment] / [Format]
2		[Service Mode] / [State Confirmation] / [Memory/Storage Adjustment] / [Storage R/W Check]
3		Install Data

3.15 Replace control panel unit

Procedure	Replacement part/Service job	Adjustment/setting items
1	Replace control panel unit	[Accessibility] / [Touch Panel Adjustment]

3.16 Replace DF control board (DF-628)

Procedure	Replacement part/Service job	Adjustment/setting items
1	Replace DF control board	Installing the firmware
2		[Service Mode] / [ADF] / [Original Tray Width]
3		[Service Mode] / [ADF] / [Mixed original Size adjustment]

3.17 Add key counter

Procedure	Replacement part/Service job	Adjustment/setting items
1	Add key counter	Re-entry of Enhanced Security settings

3.18 Execute initialize

Procedure	Replacement part/Service job	Adjustment/setting items
1	Execute initialize	Re-entry of Utility settings
2		[Service Mode] / [System 1] / [Serial Number]
3		[Service Mode] / [System 1/2] and re-entry of setting values
4		Re-entry of Enhanced Security settings

3.19 Add an optional device

Procedure	Replacement part/Service job	Adjustment/setting items
1	Add an optional device	[Service Mode] / [Firmware Version]

3.20 Execute F/W update

Procedure	Replacement part/Service job	Adjustment/setting items
1	Execute F/W update	[Service Mode] / [Firmware Version]

3.21 Add fax board

Procedure	Replacement part/Service job	Adjustment/setting items
1	Add fax board	[Service Mode] / [System2] / [Option Board Status]
2		Installing the firmware
3		[Service Mode] / [System1] / [Marketing Area] / [Fax Target]

3.22 Attach DF-628

Procedure	Replacement part/Service job	Adjustment/setting items
1	Attach DF-628	ADF adjusting the height
2		Adjusting front side skew feed on ADF
3		[Service Mode] / [ADF] / [Read Pos Adj]
4		[Service Mode] / [ADF] / [Feed Zoom]