Konica-Minolta bizhub 7721
Service Mode. CLEAR DATA
1 DRAM CLEAR
It will be displayed only when the optional FAX kit FK-510 is mounted.
- Clear all data in the memory file and free all memory to 100%, the user data are not effect.
- But only clear DRAM data on MFP board not include DRAM data on NIC and Flash ROM backup image data
NOTE
• Perform the main switch OFF/ON after Memory clear.
• Not include DRAM data on NIC board.
2 FLASH ROM CLEAR
- To return the settings of the following functions to their defaults by clearing their current settings.
- The items below are cleared (initialized).
NOTE
• Before performing [FLASH ROM CLEAR], record the setting values that are initialized by this operation.
• To record the setting values, it is helpful to create and print reports and lists.
• As the reports and lists do not include some setting values, be sure to record them separately.
• After performing [FLASH ROM CLEAR], re-entering data is required based on the recorded setting values.
3 MEMORY CLEAR
- To clear the setting values listed on the right, resetting them to the default values.
- The following items are initialized;
UTILITY
SERVICE MODE - SERVICE'S CHOICE
SERVICE MODE - ADJUST
SERVICE MODE -ADMINISTRATOR NUMBER REGISTRATION
SERVICE MODE - FIXED ZOOM CHANGE
SERVICE MODE - SECURITY
Copy program registration.
NOTE
• After memory clear has been executed, be sure to turn OFF and ON the power switch.
Procedure
- Select [MEMORY CLEAR], and press the OK key.
- Select [YES], and press the OK key.
NOTE
• After MEMORY CLEAR has been executed, be sure to turn OFF and ON the power switch.
4 TOTAL CLEAR
- To clear the all electronic counters.
- The following counters are cleared;
SIZE COUNTER
PM COUNTER
MAINTENANCE COUNTER
SUPPLIES COUNTER
APPLICATION COUNT.
SCAN COUNTER
PAPER SIZE COUNTER
MISFEED COUNTER
TROUBLE COUNTER
NOTE
• When turning OFF the power switch after clearing the data, make sure that the message "ACCEPTED" is displayed on the control panel.
• After memory clear has been executed, be sure to turn OFF and ON the power switch.
5 PM COUNTER
To clear each of the counts of the PM counter.
• BYPASS
• TRAY 1
• TRAY 2
• TRAY 3
• TRAY 4
• TRAY 5
• ADF FEED
• ADF REVERSE
• IR
• OZONE
• FUSING
• TRANSFER
NOTE
• When turning OFF the power switch after clearing the data, make sure that the message "ACCEPTED" is displayed on the control panel.
• After memory clear has been executed, be sure to turn OFF and ON the power switch.