-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Konica-Minolta bizhub 654e
Troubleshooting. JAM. 13-01, 13-40
Tray 3 feed section
Detection timing
13-01 |
The leading edge of the paper does not block the tray 3 paper feed sensor (PS21) even after the lapse of a given period of time after the tray 3 starts to feed paper. |
13-40 |
For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
- |
The tray 3 paper feed sensor (PS21) is blocked when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant parts
• LCC transport motor (M25)
• Tray 3 paper feed clutch (CL5)
• Tray 3 paper feed sensor (PS21)
• Paper feed/transport drive board (PFTDB)
• Printer control board (PRCB)
Step |
Action |
Control signal |
Location |
1 |
Initial check items |
|
|
2 |
PS21 I/O check, sensor check |
PFTDB CN20-9 (ON) |
6-X |
3 |
CL5 operation check |
PFTDB CN19-5 (REM) |
5-X |
4 |
M25 operation check |
PFTDB CN17-1 to 7 |
11-X |
5 |
PFTDB ICP3 or ICP12 conduction check |
|
|
6 |
Replace PFTDB |
|
|
7 |
PRCB ICP13 conduction check |
|
|
8 |
Replace PRCB |
|
|