| Classifica- tion |
Jam code |
Cause |
Resulting operation |
Correction |
| Regis- tration convey- ance |
J3101 |
During operation |
The paper leading edge sensor (PS43) does not turn ON within a specified period of time after the registration clutch (CL1) turns ON. |
If there is a sheet of paper being printed when a jam occurs, the main body completes the paper exit before stopping operations. |
Open the front doors / Lt and /Rt, pull out the ADU section and remove jammed paper if any. |
| J3102 |
The fusing exit sensor (PS30) does not turn ON within a specified period of time after the paper leading edge sen- sor (PS43) turns ON. |
| Fusing/ paper exit |
J3201 |
The paper exit sensor (PS37) does not turn ON within a specified period of time after the fusing exit sensor (PS30) turns ON. |
| J3202 |
The reverse sensor (PS42) does not turn ON within a specified period of time after the fusing exit sensor (PS30) turns ON. |
| J3203 |
The reverse sensor (PS42) does not turn OFF within a specified period of time after it turns ON. |
| J3204 |
The paper exit sensor (PS37) does not turn ON within a specified period of time after the reverse sensor (PS42) turns OFF. |
| J3205 |
The paper exit sensor (PS37) does not turn OFF within a specified period of time after the paper exit sensor (PS3) turns ON. |
| J3206 |
When idling |
The paper exit sensor (PS37) turns ON while in idling. |
— |
| J3208 |
The reverse sensor (PS42) turns ON while in idling. |
| J3209 |
The fusing exit sensor (PS30) turns ON while in idling. |
| J3210 |
The reverse/exit sensor (PS46) turns ON while in idling. |
| Front door |
J5101 |
During operation |
The front door /Lt or /Rt is opened while in printing, so the open/close sensor /1 (PS38) or /2 (PS39) turns OFF. |
The main body stop immedi- ately. |
Close the front door /Rt or /Lt. |