Konica-Minolta bizhub 601

After completion of handling of a trouble with the fusing system, release the trouble. When a trouble occurs with the fusing system, the software DipSW-3-1 (SC ratchet) is set to "1" ("0" for default). This adjustment returns the setting to the default condition (normal operation).

NOTE
• When a malfunction code (C-3401 to 3902) is displayed on the touch panel, you cannot enter the service mode. Accordingly, the following shows the method for resetting a trouble from the power OFF condition.

Procedure

1. Turn ON the main power switch (SW1).
2. With the Utility/Counter key pressed, turn ON the power switch (SW2).
3. Press [Trouble reset] to release a trouble with [OK] displayed.
4. Turn OFF and ON the power switch (SW2).