Konica-Minolta bizhub 36

Starting procedure

NOTE
• Ensure appropriate security for Service Mode function setting procedures. They should NEVER be shown to any unauthorized person not involved with service jobs.

1. 1. Press the Utility/Counter key.
2. Touch [Meter Count] on meter count display.
3. Press the following keys in this order.
   Stop -> 0 -> 0 -> Stop -> 0 -> 1
4. Touch [Password], and enter the CE password using the display keyboard or the 10-key pad.
   NOTE
   • The initial setting for CE password is "92729272."
   • Access attempts to the Service Mode with a CE password is limited to up to 3 times. If the number of invalid access attempts reaches three, your access is locked. Until access lock is released, the Service Mode is not accessible. To release access lock, turning OFF/ON the power switch and rebooting the machine is necessary. (When the machine is rebooted, the invalid access attempts count is cleared.)
   • The service code entered is displayed as "*."
5. Touch [OK].
6. The Service Mode menu will appear.
   NOTE
   • Be sure to change the CE password from its default value.
   • For the procedure to change the CE password, see the [CE Password].

Exiting procedure

• Touch [Close].