Konica-Minolta bizhub 3301P
Service Mode. Device Tests
Flash Test
This test verifies the condition of the flash device by writing data to it and then reading data from it.
Warning—Potential Damage: This test deletes all data on the flash device.
- From the Diagnostics menu, navigate to:
DEVICE TESTS >Flash Test - Files will be lost. Go/Stop? appears.
- Do any of the following:
- Press [OK] to continue.
- Press [e] to cancel. - When the test starts, Flash Test Testing… appears. The test cannot be stopped or canceled after it has begun.
- After the test is complete, a message appears indicating a pass or fail result.
- Press [e] to return to the Device tests menu.
- Reformat the flash device using the Flash format setting in the Utilities menu.