Konica-Minolta bizhub 3301P
Service Mode. Base Sensor Test
Use this to determine that the sensors located inside the printer are operating correctly.
The following sensors can be checked using this test:
- Narrow Media
- Input
- Exit/Output
- Front Door
To run the test:
- From the Diagnostics menu, navigate to Base Sensor Test.
- Choose a sensor.
- Manually actuate the sensor to verify that it toggles. If the sensor does not toggle, then it is malfunctioning.
Sensor Values Input
Output
Front DoorOpen
ClosedNarrow Media Narrow
Wide - Press [e] to exit the test.