Konica-Minolta bizhub 240F
Service Mode. Field Service Program Modes 2
The fax machine feature maintenance modes for machine adjustment. Each mode is listed below along with the command used to activate the mode and a brief functional description.
When you press “ * ”, you will hear short beeps. However continue the operation, as there is no problem.
| Service Program | Explanation | Operation |
|---|---|---|
| Life monitor maintenance | Use this mode to clear the resettable counter or reenter the life monitor. | <Setting>, <*>, <2>, <0> |
| Sensor input test | This mode enables to confirm the sensor status. | <Setting>, <*>, <2>, <2> |
| Printer diagnostic mode | This mode enables to confirm the operation of the printer parts. | <Setting>, <*>, <2>, <3> |
| Network service mode | Used to clear administrator's password andi initialize authentication method. | <Setting>, <*>, <2>, <4> |
| Flash ROM Sum check | This mode enables to check Sum after the Flash ROM version is updated. | <Setting>, <*>, <2>, <9> |
| Set service report | Used to enter location where to send the ser- vice report. | <Setting>, <*>, <4>, <2> |
| Printer registration adjustment | This mode adjusts the print position. | <Setting>, <*>, <4>, <3> |
| Reset printer trouble | This mode clears the service call. Clear the warning when the trouble is settled. | <Setting>, <*>, <4>, <5> |
| Cleaning mode | This mode rotate the Pickup roller and reg- istration roller automatically so that you can clean the surface of them. | <Setting>, <*>, <4>, <6> |
| Key Counter | If you have attached the key counter to the machine activate this mode to let it count the printed-paper. | <Setting>, <*>, <5>, <0> |
| Network switch mode | Adjust the network parameter. | <Setting>, <*>, <5>, <1> |
| Touch Panel Adjust- ment | Correct the X, Y on the touch panel. | <Setting>, <*>, <5>, <6> |
| Printer control param- eter mode | Adjust functions of print controller. | <Setting>, <*>, <5>, <7> |
| Network Capture | You can capture the packet data the ma- chine has sent and received, and download it from the web browser or sent it to an e-mail address. |
<Setting>, <*>, <5>, <8> |
| Storage Maintenance | This mode is used to erase or initialize the Compact Flash (CF) memory card on Mes- sage Board. | <Setting>, <*>, <5>, <9> |
| Service function menu | All the field service program modes are avail- able from the menu. | <Setting>, <*>, <7>, <7> |
| Wire cleaning warning | This mode makes to display the cleaning warning for drum charge wire an print head in a certain interval. | <Setting>, <*>, <8>, <6> |
| Installing language | You can install, edit or delete languages on the machine that is prepared in and USB memory. | <Setting>, <*>, <9>, <1> |
| Counter Information Maintenance | This mode is used to correct the counter data on SRAM (main control panel) and CF memory card. | <Setting>, <*>, <9>, <3> |
| Update the software | Update main ROM, optional print controller ROM and network board ROM using this mode. | <Setting>, <*>, <9>, <8> |
| Quick initial settings | You can do the following setting with continu- ously:
|
<Setting>, <*>, <9>, <9> |