Konica-Minolta bizhub 1600f
Service Mode. ADMINISTRATOR FUNCTIONS
Each one of the administrator functions described here can be accessed via a specific succession of keys.
The alphabetic keys are available via the navigation keys ▲ and ▼ via the keyboard.
For example, to enter a sequence ▼ [*] [A] (launching scanner tuning):
- Press the following key ▼
- Press the following key [*]
- Press ▼ to display all the options available until you reach [A].
Confirm your choice with OK.
INITIALIZING AND ERASING MEMORY
Before you start, set the 8 bit parameter installation configuration 1 to 1.
- Reset all parameters (user, installer or technical) to the default configuration (factory configuration):
▼ [*] [0] - Erase the directory:
▼ [*] [1] - Erase the logs :
▼ [*] [2] - Erase the printer counters:
▼ [*] [3] - Erase the consumable counters (▼ 85):open the printer front door then:
▼ [*] [4]
To see the initialization message (this requires inserting the smart card INIT), switch On then Off. - Reinitialize the flash data (erases all):open the printer front door then :
▼ [*] [5] - Erase mailboxes (internal) only:
▼ [*] [6] - Erase all.
Reset to default configuration (combination of functions 0 and 8):
▼ [*] [7] - Erase all documents stored in memory:
▼ [*] [8] - Erase the first element of the printer queue :
▼ [*] [I] - Erase Printer Error:
▼ [*] [T]
Then switch ON/OFF the machine.