HP LaserJet M630h Enterprise MFP

The Pre-boot menus are avaialble prior to the product initializing.

CAUTION:
The Format Disk option performs a disk initialization for the entire disk. The operating system, firmware files, and third party files (among other files) will be completely lost. HP does not recommend this action.

TIP:
The Pre-boot menu can be remotely accessed by using a telnet network protocol to establish a administration connection to the product.

Open the Pre-boot menu using the product control panel

1. Turn the product on.
2. The HP logo displays on the product control panel. When a "1/8" with an underscore displays below the HP logo, touch the logo to open the Pre-boot menu.
3. Use the arrow buttons on the touchscreen to navigate the Pre-boot menu.
4. Touch the OK button to select a menu item.

Cold reset using the Pre-boot menu from the product control panel

CAUTION:
This procedure resets all product configurations and settings to factory defaults (customer configurations and settings are lost).

1. Turn the product on.
2. The HP logo displays on the product control panel. When a "1/8" with an underscore displays below the HP logo, touch the logo to open the Pre-boot menu.
3. Use the down arrow ▼ button to highlight the +3:Administrator item, and then touch the OK button.
4. Use the down arrow ▼ button to highlight the +8:Startup Options item, and then touch the OK button.
5. Use the down arrow ▼ button to highlight the 2 Cold Reset item, and then touch the OK button to select it.
6. Touch the Home ⌂ button to return to the main Pre-boot menu and highlight the 1:Continue item, and then touch the OK button.
   NOTE: The product will initialize.