PrintCopy.info service

HP LaserJet M133 Pro MFP

Diagnostic. Check toner-cartridge status

Check toner-cartridge status (M101/M106)

Check the supplies status page for the following information:

  • Estimated percentage of cartridge life remaining
  • Approximate pages remaining
  • Part numbers for HP toner cartridges
  • Number of pages printed

The printer prints the supplies status page when it prints the configuration page.

  1. Press and hold the Resume/Cancel button until the Ready light begins blinking.
  2. Release the Resume/Cancel button.

Check toner-cartridge status (M129/M134)

Follow these steps to check the estimated life remaining in the toner cartridges and if applicable, the status of other replaceable maintenance parts.

NOTE: The steps vary according to the type of control panel.

Step one: Print the supplies status page (LED control panels)
  1. Press and hold the Start Copy button until the Ready light begins blinking.
  2. Release the Start Copy button. The supplies status page prints with the printer configuration page.
Step one: Print the supplies status page (2-line and touchscreen control panels)
  1. On the printer control panel, open the Setup menu.
  2. Open the Reports menu.
  3. 2-line control panels:
    Open the Supplies Status menu, press the OK button, select Print Supplies status page item, and then press the OK button.
    Touchscreen control panels:
    Touch Supplies Status.
Step two: Check supplies status
  1. Look at the supplies status report to check the percent of life remaining for the toner cartridges and if applicable, the status of other replaceable maintenance parts.
    Print quality problems can occur when using a toner cartridge that is at its estimated end of life. The supplies status page indicates when a supply level is very low. After an HP supply has reached the very low threshold, HP’s premium protection warranty on that supply has ended.
    The toner cartridge does not need to be replaced now unless the print quality is no longer acceptable. Consider having a replacement available to install when print quality is no longer acceptable.
    If you determine that you need to replace a toner cartridge or other replaceable maintenance parts, the supplies status page lists the genuine HP part numbers.
  2. Check to see if you are using a genuine HP cartridge.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us