Epson WorkForce WF-C5790
Troubleshooting. ADF/SCN ERROR (7)
Error name
- Paper jam error (error code: 100054)
Cause
- Occurs if a paper jam occurred in the document feed path of the ADF.
Suspected cause
- Jammed paper or foreign object remained
- ADF PE Sensor failure
- Main Board failure
Troubleshooting
Step | Check and measure | Yes | No |
---|---|---|---|
1 | Visually check the paper feed path. Is there no jammed paper remaining in the paper feed path? |
Go to step 2 | Remove the jammed paper or foreign object. |
2 | Visually check the FFCs of the ADF/SCN Unit. Check the FFC (thick) in ADF/SCN that is connected to the main board to make sure that it is not inserted obliquely or disconnected. |
Go to step 3 | Properly connect the FFC of ADF/SCN. Replace the ADF/SCN Unit if the FFC is damaged. |
3 | Replace the Main Board Assy. Does the error occur after replacing the Main Board Assy? |
End |