Epson SureColor T3470
Troubleshooting. The printer makes a strange noise when the CR is moving
Suspected cause
- CR Belt tension abnormality
- Lubrication on the CR moving parts is insufficient.
- CR Scale, CR Encoder abnormality
Parts/Components to be checked
- CR Belt
- Oil Pad
- CR Scale
- CR Encoder
Troubleshooting
Step | Confirmation points and methods | YES | NO |
---|---|---|---|
1 | Check the CR Belt tension • Perform CR Timing Belt Tension Adjustment. Does the product recover from the failure? |
End | Go to step 2 |
2 | Lubrication to the Oil Pad Does the product recover from the failure? |
End | Go to step 3 |
3 | Check CR Scale, CR Encoder contamination/damage • Perform CR Scale contamination check with Service Program. • Check if the CR Scale is damaged or contaminated. • Clean the CR Scale if contaminated. • Check that the CR Encoder is installed correctly. • If the CR Scale/CR Encoder is damaged, replace it. Does the product recover from the failure? |
End | Escalate to person in charge |