Epson PX7050B
Troubleshooting. 3. Error is indicated during printing nozzle check pattern 1
Paper Jam error
Occurrence Condition
This error occurs when top/bottom of paper is not detected by PE Sensor in the specified steps of paper feeding operation correctly.
Major Occurrence Timing
• Power-on timing
• Paper loading timing
• Paper eject timing
• Duplex print timing
Major Troubleshooting
1 remove the jammed paper by opening Scanner Unit or Printer Cover.
2 Push “Start” button.
3 If not resolved by 2), check the following.
• Foreign material, bits of paper
• Part come-off
• PE Lever
• PE Sensor
• Float of Paper Guide Front Porous Pad
• Main Board
• PW Sensor
NOTE
* If an error occurs during printing, the page where the error occurred is skipped and the printing resumes from the next page.
* If an error occurs during duplex printing, the following are performed.
• If an error occurs during the front face of duplex printing, the page where the error occurred and the next page are skipped and the printing resumes from the page after the next
• If an error occurs during the back face of duplex printing, the page where the error occurred is skipped and the printing resumes from the next page.