Canon imageRUNNER C1028i
Troubleshooting. Jam Codes
Jam Code (main body)
Code | Name | Sensor No. | Description |
---|---|---|---|
0104 | Delay jam in paper pickup section | SR710 | The registration sensor cannot detect the leading edge of paper from the moment paper pickup starts to the moment the jam detection time is reached. |
0208 | Stationary jam in paper pickup section | SR710 | The registration sensor cannot detect the no paper status specified time before the leading edge of the picked up paper reaches this sensor. |
010c | Delay jam in deliver section | SR710, SR6005 |
|
0210 | Stationary jam in delivery section | SR710, SR6005 |
|
0214 | Stationary jam in machine | SR706, SR710, SR6001, SR6005 | Paper was detected in the paper transport path during initial rotation, during automatic delivery, at the end of cleaning, or at reception of an emergency stop command. |
1118 | Door open jam | SR720 | The door was opened when there was printing paper in the transport path. |
0221 | Reverse section JAM | SR706, SR715 | This jam is applied when the double-fed paper drops on the back of the host machine. The machine determines the reverse section jam if the paper length that is detected by the reverse sensor (SR706) is 50mm or more longer than the paper length that is detected by the delivery sensor (SR715). |
0228 | Reverse re-pickup section jam | SR710 | The machine determines the reverse re-pickup jam if the registration sensor (SR710) cannot detect the presence of paper within the specified time (t) after the duplexing pickup starts. Specified time (t) differs depending on the feeding speed. 1/1 speed: approx. 2.0 sec 4/5 speed: approx. 2.5 sec 1/2 speed: approx 4.0 sec |
Jam Code (ADF)
Code | Name | Sensor No. | Description |
---|---|---|---|
0001 | ADF paper trailing edge sensor (SR719) not reaching (delay jam) | SR719 | The leading edge of paper does not reach the ADF paper trailing edge sensor (SR719) within 1.8 sec after the trailing edge of precedent page passes through the ADF paper trailing edge sensor (SR719) in 1-sided multiple jobs. The leading edge of paper does not reach the ADF paper trailing edge sensor (SR719) within 1.2 sec after reverse operation starts in 2-sided job. |
0002 | ADF paper trailing edge sensor (SR719) stray (stray jam) | SR719 | The trailing edge of paper does not passes through the ADF paper trailing edge sensor (SR719) within 3.4 sec after the leading edge of paper reaches the ADF paper trailing edge sensor (SR719) in 1-sided job. The trailing edge of paper does not passes through the ADF paper trailing edge sensor (SR719) within 3.5 sec after the leading edge of paper reaches the ADF paper trailing edge sensor (SR719) in 2-sided job. |
0094 | Initial stationary (in-body residual jam) | SR719 | The ADF paper trailing edge sensor (SR719) detects paper at power-ON. |
0095 | Pickup NG | SR718 | The paper is removed from the ADF original tray within 0.1 sec after the start key is pressed. |