Canon imageRUNNER Advance C9070 Pro
Troubleshooting. Jam Code. Insertion Unit-H1
Insertion Unit-H1
ACC ID | Jam Code | Type | Sensor Name / Description | Sensor ID |
---|---|---|---|---|
02 | 10E0 | DELAY | Entrance sensor | S20 |
02 | 10E2 | DELAY | Entrance sensor, Delivery sensor 2 | S20, S21 |
02 | 10E4 | DELAY | Upper tray registration sensor, Lower tray registration sensor | S3, S7 |
02 | 10E5 | DELAY | Middle feed sensor | S8 |
02 | 10E6 | DELAY | Middle feed sensor, Reverse entrance sensor | S8, S18 |
02 | 10E7 | DELAY | Reverse sensor, Reverse entrance sensor | S17, S18 |
02 | 10E8 | DELAY | Reverse timing sensor, Reverse entrance sensor | S16, S18 |
02 | 11F0 | STNRY | Entrance sensor | S20 |
02 | 11F2 | STNRY | Delivery sensor 2 | S21 |
02 | 11F4 | STNRY | Upper tray registration sensor, Lower tray registration sensor | S3, S7 |
02 | 11F5 | STNRY | Middle feed sensor | S8 |
02 | 11F6 | STNRY | Middle feed sensor, Reverse entrance sensor | S8, S18 |
02 | 11F7 | STNRY | Reverse sensor | S17 |
02 | 11F8 | STNRY | Reverse timing sensor | S16 |
02 | 13CD | POWER ON | Power ON jam | - |
02 | 14CC | COVER OP | Front upper cover open/close switch, Upper cover open/close switch, Inserter open/close sensor | SW1, SW2, S19 |
02 | 1FC0 | TIME OUT | Failed to detect OFF of EntryStart although a specified period of time has passed after replying ON of EntryStartAck | - |
02 | 1FC1 | TIME OUT |
|
- |
02 | 1FC2 | OTHER | Upper tray empty sensor | S9 |
02 | 1FC3 | OTHER | Lower tray empty sensor | S12 |
02 | 1FCE | ERROR*1 | Recovered by opening and closing the Door | - |
02 | 1FCF | STOP | Press Stop key | - |
*1 The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If the same jam is detected although the above operation is performed, an error code will be notified.