Canon imageRUNNER Advance C5240i
Troubleshooting. Alarm Code 1
Location of Trouble | Alarm Code | Description | Details | |
---|---|---|---|---|
00 | - | 0246 | Error code display (4-digit) | Soft counter PCB cannot write normally. |
00 | - | 0247 | Error code display (4-digit) | Soft counter PCB cannot restore data. |
02 | - | 0025 | Insufficient Scanner Unit (Paper Front) LED light intensity alarm (Some of the LEDs are OFF. Scanning can be continued.) | In the case that the light intensity is insufficient at LED lighting. |
04 | - | 0008 | Optional deck lifter error | - |
10 | - | 0001 | No toner (Bk) (RDS creates) | - |
10 | - | 0002 | No toner (Cy) (RDS creates) | - |
10 | - | 0003 | No toner (M) (RDS creates) | - |
10 | - | 0004 | No toner (Ye) (RDS creates) | - |
10 | - | 0017 | Toner (Y) prior delivery alarm | - |
10 | - | 0018 | Toner (M) prior delivery alarm | - |
10 | - | 0019 | Toner (C) prior delivery alarm | - |
10 | - | 0020 | Toner (Bk) prior delivery alarm | - |
10 | - | 0022 | Patch detection light intensity abnormal change alarm | - |
10 | - | 0100 | Toner bottle change notification alarm | - |
11 | - | 0001 | Waste toner alarm | Detected waste toner bottle full. |
11 | - | 0010 | Near-full state of the Waste Toner Container | Detection of near-full state of the Waste Toner Container |
30 | - | 0002 | Charge loss of secondary transfer roller | Charge loss of secondary transfer roller was detected. |
31 | - | 0006 | HDD failure when equipped with the mirroring function | HDD failure when equipped with the mirroring function |
31 | - | 0008 | HDD failure prediction alarm | Movement: HDD failure is expected to occur in a short time due to occurrence of physical error in HDD. It does not occur in the HDD of mirroring configuration. Cause: Error in the S.M.A.R.T. value of HDD Measures:
|
33 | - | 0010 | Scanner Unit Exhaust Fan (FM1) alarm | The fan rotation signal cannot be detected after 3 seconds have passed since the Scanner Unit Exhaust Fan (FM1) of the Reader is turned ON. Check the connector connection -> Replace the Scanner Unit Exhaust Fan (FM1). |
34 | - | 0003 | Auto registration adjustment | Timeout occurred due to unsuccess in reading 10 sets of auto registration pattern. Registration detection sensor failure, Registration detection sensor cleaning member covered the registration detection sensor, or no image drew on the belt. |
37 | - | 0001 | For R&D | For R&D |
37 | - | 0002 | For R&D | For R&D |
37 | - | 0003 | For R&D | For R&D |
37 | - | 0004 | For R&D | For R&D |
37 | - | 0005 | For R&D | For R&D |
37 | - | 0006 | For R&D | For R&D |
37 | - | 0007 | For R&D | For R&D |
37 | - | 1000 | For R&D | For R&D |
37 | - | 2000 | For R&D | For R&D |
38 | - | 0001 | For R&D | For R&D |
38 | - | 0002 | For R&D | For R&D |
50 | - | 0010 | Successive occurrence of separation alarm | Condition unable to separate 1st sheet of original from the ADF occurs 3 times in a row. Check rotation of the Pickup Motor -> Check the life of the Pickup Roller -> Check if paper lint is at the pickup slot. |
50 | - | 0014 | Insufficient Scanner Unit (Paper Back) LED light intensity alarm (Some of the LEDs are OFF. Scanning can be continued.) | In the case that the light intensity is insufficient at LED lighting. |