Canon imageRUNNER Advance C5240i
Troubleshooting. Jam Code. Staple Finisher-J1, Booklet Finisher-J1
Staple Finisher-J1 / Booklet Finisher-J1
| ACC ID | Jam Code |
Type | Sensor Name | Sensor ID |
|---|---|---|---|---|
| 02 | 1200 | Early jam | Inlet sensor | PI103 |
| 02 | 110F | Retry error * | - | - |
| 02 | 1F2F | Retry error * | - | - |
| 02 | 1F8F | Retry error * | - | - |
| 02 | 1002 | Delay jam | Punch pass sensor | PCB12 |
| 02 | 1400 | Door open | - | - |
| 02 | 1408 | Door open | - | - |
| 02 | 1F88 | Door open | - | - |
| 02 | 1102 | Stationary jam | Punch pass sensor | PCB12 |
| 02 | 1F92 | Delay jam | Delivery sensor | PI11 |
| 02 | 1F87 | POWER ON | Paper pushing plate motor clock sensor,Vertical pat paper sensor,No.1 paper sensor,No.2 paper sensor,No.3 paper sensor,Saddle inlet sensor | PI1, PI17, PI18, PI19, PI20, PI22 |
| 02 | 1001 | Delay jam | Inlet sensor | PI103 |
| 02 | 1101 | Stationary jam | Inlet sensor | PI103 |
| 02 | 1301 | POWER ON | Inlet sensor | PI103 |
| 02 | 1004 | Delay jam | Feed path sensor | PI104 |
| 02 | 1104 | Stationary jam | Feed path sensor | PI104 |
| 02 | 1304 | POWER ON | Feed path sensor | PI104 |
| 02 | 1FA2 | stationary jam | Delivery sensor, Vertical path sensor | PI11,PI17 |
| 02 | 1F91 | Delay jam | No.1 paper sensor | PI18 |
| 02 | 1FA1 | Stationary jam | No.1 paper sensor,No.2 paper sensor,No.3 paper sensor | PI18,PI19,PI20 |
| 02 | 1F93 | Delay jam | Saddle inlet sensor | PI22 |
| 02 | 1FA3 | Stationary jam | Saddle inlet sensor | PI22 |
| 02 | 1644 | error | Side registration HP sensor | PI63 |
| 02 | 1645 | POWER ON | Punch pass sensor | PCB12 |
| 02 | 1F86 | Staple jam | Saddle staple | SDL STP |
| 02 | 1500 | Staple jam | stapler | STP |
* The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If the same jam is detected regardless of the operation above, the error code is displayed.