Canon imageRUNNER Advance C2225i
Adjustment. HDD, Main controller PCB 1
HDD
Before Replacing | 1) Backup of the set/registered data Use the Remote UI. Management Settings > Data Management > Import/Export Target data:
(Lv.1) COPIER > FUNCTION > MISC-P > USER-PRT List of the set/registered data which cannot be backed up is printed." |
Aftter Replacing | 1) HDD format 1-1) Start with the safe mode. (While pressing 2 and 8 keys simultaneously, turn ON the main power switch.) 1-2) Use SST to format all partitions. 2) Downloading system software 2-1) Use SST to download the system software (System, LANG, RUI and others).3) Initializing the key, certificate and CA certificate (Lv.2) COPIER > FUNCTION > CLEAR > CA-KEY 4) Turning OFF and ON the main power switch 5) Restoring the backup data Use the Remote UI. Management Settings > Data Management > Import/Export 6) Resetting/registering the data While referring to the list of set/registered data which was printed before replacement, reset/register the data. |
Points to Note when Using the HDD | When using the HDD of the other machine (different serial number), be sure to format the HDD after the installation. If the HDD is not formatted, the operation cannot be guaranteed. |
Main controller PCB 1
Operation at Replacement |
Transferring the parts from old PCB to new PCB
Resetting/registering the data is not necessary after Main Controller PCB 1 is replaced. |
Prohibited |
Do not transfer the following parts to another model (which has a different serial number).
|