Canon imageRUNNER 1643P
Service Mode. ADJUST GR. 1
CHARGE BIAS K
Adjustment of Bk-color primary charging bias
Detail | To change the primary charging bias value for black. |
Use Case | When an image failure occurs |
Adj/Set/Operate Method | Enter setting value, and then press OK key. |
Display/Adj/Set Range | -5 to +5 |
Unit | 10V |
Default Value | 0 |
DEV BIAS K
Adjustment of Bk-color developing bias
Detail | To change the developing bias value for black. |
Use Case | When eliminating Bk-color fogging |
Adj/Set/Operate Method | Enter setting value, and then press OK key. |
Caution | Toner deposit on a white spot area may be solved by changing the value. Correct the value gradually and observe the result. Toner density in the printing result may change. Try either a positive or negative value while checking whether the error is cleared. |
Display/Adj/Set Range | -5 to +5 |
Unit | 10V |
Default Value | 0 |
FRT FUSE TEMP
Adjustment of fixing temperature (1st side)
Detail | To change the fixing temperature for the front side. |
Use Case | When an image failure occurs |
Adj/Set/Operate Method | Enter setting value, and then press OK key. |
Caution | Raising the fixing temperature may cause hot offset, separation failure for thin moist paper, and/or further curling. Lowering the fixing temperature may cause fixing errors. |
Display/Adj/Set Range | -4 to +4 |
Unit | 5 deg C |
Default Value | 0 |