Canon imageRUNNER 1643P

Function Overview

It is possible to display, configure, and execute various service mode modes as well as restart the host machine by using remote UI.

Operating conditions

In order to operate service mode using Remote UI, the following conditions must be met.
• The RMT-SW (Remote UI service mode function) setting is enabled (setting value: ON) in service mode Set RMT-SW by performing one of the following operations. Both operations have the same effect.

• SERVICE MODE > OPTION GR. > RMT-SW
• [Setup] > [Control Menu] > RMT-SW

How to Use

1. Activate the Web browser, and access the following URL:
   http://<Host machine's IP address or host name>/servicemode.html
2. Enter the password, and click [LOGIN].
   Password required for authentication differs depending on the following service mode setting:
   SERVICE MODE > OPTION GR. > PSWD-SW
   PSWD-SW setting value 0
   • Password of remote UI service mode
   PSWD-SW setting value 1
   • Password of remote UI service mode
   • Password of system administrator
   NOTE:
   • If you do not know the password of remote UI service mode, contact the Support Dept. of the sales company.
   • Password of service mode cannot be changed.
3. When finishing the operation, click [REBOOT] or [Log Out].
   NOTE:
   If the user logged in and then closed the browser without logging out, connection status remains as "LOGIN". If the user attempts to log in to service mode under "LOGIN" status, exclusive control is executed so that the user cannot access service mode. In that case, wait for a fixed time (3 minutes) from the last access to let the user be automatically logged out, or turn OFF/ON the power of the machine to be forcibly logged out.