Canon imageRUNNER 1435
Service Mode. ADJ-XY 1
ADJ-X
Adjustment of image position in book mode: vertical scan
| Details | - Adjust the image reading start position in the vertical scanning direction for copyboard reading. - The image position is moved 0.1mm to rear side by setting value 1. |
| Use case | When replacing the Main Controller PCB / clearing RAM data. |
| Adj/set/operate method | Enter the setting value (switch negative/positive by * key) and then press OK key. |
| Caution | Do not use for usual service. After the setting value is changed, write the changed value on the service label. |
| Display/adj/set range | -30 to 30 |
| Unit | 0.1 mm |
| Default value | 0 |
ADJ-Y
Adjustment of image position in book mode: horizontal scan
| Details | - Adjust the image reading start position in the horizontal scanning direction for copyboard reading. - The image position is moved 0.1mm to front side by setting value 1. |
| Use case | When replacing the Main Controller PCB / clearing RAM data. |
| Adj/set/operate method | Enter the setting value (switch negative/positive by * key) and then press OK key. |
| Caution | After the setting value is changed, write the changed value on the service label. |
| Display/adj/set range | -16 to 16 |
| Unit | 0.1 mm |
| Default value | 0 |
ADJ-Y-DF
Adjustment of image position in ADF mode: horizontal scan [front side]
| Details | - Adjust the image reading start position in the horizontal scanning direction for ADF reading. - The front image position is moved 0.1mm to rear side by setting value 1. |
| Use case | When replacing the Main Controller PCB / clearing RAM data. |
| Adj/set/operate method | Enter the setting value (switch negative/positive by * key) and then press OK key. |
| Caution | After the setting value is changed, write the changed value on the service label. |
| Display/adj/set range | -16 to 16 |
| Unit | 0.1mm |
| Default value | 0 |