Canon imageRUNNER 1435

Automatic Gain Offset Adjustment for the CIS unit

1. Rewrite "1000" for the setting value on following service mode.
   • COPIER >ADJUST > CCD > LED-BW-R, BW-G, BW-B = 1000
2. Rewrite "1100" for the setting value on following service mode.
   • COPIER >ADJUST > CCD > LED-CL-R, CL-G, CL-B = 1100
3. Press "OK" for each on following service mode.
   • COPIER > FUNCTION > CCD > CL-AGC, BW-AGC
4. After the automatic adjustment, "executing" disappears.
5. Check the setting value is changed. When it is not changed, readjust from procedure 1) to 4).

Adjustment of Image Reading Start Position

1. Enter "-20" for the setting value on following service mode.
   • COPIER > ADJUST > ADJ-XY > STRD-POS = -20
2. Select following service mode. • COPIER > FUNCTION > INSTALL > STRD-POS
3. Press OK key and then the automatic adjustment is executed. After the automatic adjustment, "executing" disappears.
4. Check the setting value is changed. When it is not changed, readjust from procedure 1) to 3).