Canon imageRUNNER 1430J
Service Mode. Function. CLEAR 1
R-CON
Initializing the setting value for reader /ADF
| Details | Initialize the setting value for reader /ADF |
| Use case | • When replacing the Main Controller PCB • When E248-0001 occurs. |
| Adj/set/operate method | 1) Select the item and then press OK key. 2) Turn OFF/ON the main power. |
ERR
Clearing error code
| Details | Clear error code (E000, E001, E002, E003) |
| Use case | When error occurs |
| Adj/set/operate method | Select the item and then press OK key. |
SRVC-DAT
Clearing service counter
| Details | To clear the service mode setting values. The user mode setting values are not cleared. The factory adjustment values of the Reader/ADF are not initialized. |
| Adj/set/operate method | 1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch. |
COUNTER
Clearing of parts counters
| Details | To clear the counter by maintenance/part/mode. The numerator printed on a system dump list becomes 0. |
| Adj/set/operate method | 1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch. |
HIST
Clear of logs
| Details | To clear the communication management/print/jam/error log. |
| Use case | When clearing logs |
| Adj/set/operate method | 1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch. |