Canon imageRUNNER 1430J

Entering White Level Data of the Standard White Plate

1. Select following service mode.
   • COPIER> ADJUST> CCD> W-PLT-X/Y/Z
2. Enter the value from the barcode label on the Copyboard Glass.

Automatic Gain Offset Adjustment for the CIS unit

1. Rewrite "1000" for the setting value on following service mode.
   • COPIER >ADJUST > CCD > LED-BW-R, BW-G, BW-B = 1000
2. Rewrite "1000" for the setting value on following service mode.
   • COPIER >ADJUST > CCD > LED-CL-R, CL-G, CL-B = 1100
3. Select following service mode.
   • COPIER > FUNCTION > CCD > CL-AGC, BW-AGC
4. Press OK key and then the automatic adjustment is executed. After the automatic adjustment, "executing" disappears.
5. Check the setting value is changed. When it is not changed, readjust from procedure 1) to 4).

Adjustment of Image Reading Start Position

CAUTION:
After the setting value is changed, write the changed value on the service label.

1. Enter "-20" for the setting value on following service mode
   • COPIER > ADJUST > ADJ-XY >STRD-POS = -20
2. Select following service mode.
   • COPIER >FUNCTION > INSTALL > STRD-POS
3. Press OK key and then the automatic adjustment is executed. After the automatic adjustment, "executing" disappears.
4. Check the setting value is changed. When it is not changed, readjust from procedure 1) to 4).