Canon imageRUNNER 1133A
Service Mode. FEED-ADJ 2
ADJ-MF
Write start position in the horizontal scanning direction at pickup from the Multi-purpose Tray
Details | To adjust the image write start position in the horizontal scanning direction when picking up paper from the Multi-purpose Tray. As the value is incremented by 1, the margin on the left edge of paper is increased by 0.25 mm. +: Left margin becomes larger. (An image moves to the right.) -: Left margin becomes smaller. (An image moves to the left.) When replacing the Main Controller PCB, enter the value of service label. |
Use case | When replacing the Main Controller PCB |
Adj/set/operate method | 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key. 2) Turn OFF/ON the main power switch. |
Display/adj/set range | -9 to 9 (-2.22 to +2.22 mm) |
Unit | Approx. 0.25 mm |
Default value | -2 |
ADJ-REFE
Write start position in the horizontal scanning direction at 2-sided pickup
Details | To adjust the image write start position in the horizontal scanning direction at 2-sided pickup. As the value is incremented by 1, the margin on the left edge of paper is increased by 0.25 mm. +: Left margin becomes larger. (An image moves to the right.) -: Left margin becomes smaller. (An image moves to the left.) When replacing the Main Controller PCB, enter the value of service label. |
Use case | When replacing the Main Controller PCB |
Adj/set/operate method | 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key. 2) Turn OFF/ON the main power switch. |
Display/adj/set range | -9 to 9 (-2.22 to +2.22 mm) |
Unit | Approx. 0.25 mm |
Default value | 0 |