Canon imageRUNNER 1025
Service Mode. Counters
This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies. The counter set increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).
| Item | Counter | Explanation |
|---|---|---|
| TOTAL (Total counter) | SERVICE1 | Service total counter 1 |
| SERVICE2 | Service total counter 2 | |
| TTL | Total counter | |
| COPY | Total copy counter | |
| PDL-PRT | PDL print counter | |
| FAX-PRT | Fax print counter | |
| REP-PRT | Report print counter | |
| 2-SIDE | Double-sided copy/print counter | |
| SCAN | Scan counter | |
| PICK-UP (Paper pickup counter) | C1 | Cassette 1 jam counter |
| C2 | Cassette 2 jam counter | |
| C3 | Not used | |
| C4 | Not used | |
| MF | Manual feed tray pickup total counter | |
| 2-SIDE | Double-sided paper pickup total counter | |
| FEEDER (Feeder related counters) | FEED | Feeder pickup total counter |
| DFOP-CNT | ADF open/close hinge counter | |
| JAM (Jam counters) | TTL | Unit total jam count |
| FEEDER | Feeder total jam count | |
| SORTER | Not used | |
| 2-SIDE | Duplex unit jam counter | |
| MF | Manual feed tray jam counter | |
| C1 | Cassette 1 jam counter | |
| C2 | Cassette 2 jam counter | |
| C3 | Not used | |
| C4 | Not used | |
| MISC (Other required counter) | WST-TNR | Not used |
| DRBL-1 (Unit supplies) | PT-DRM | Drum unit rotation count 26,000 |
Clearing Counters
- Maintenance/parts counter all clear Execute service mode > CLEAR > COUNTER to clear all maintenance/parts counters.
- Counter clear on parts replacement Press the numeric keypad key 0 after displaying the counter for a part just replaced, and the counter will be cleared individually.