| COPIER > ADJUST > VIFADJ |
| Sub item |
Description |
| CRG-BS-Y |
Charging bias setting value (Y) [When used]
Low/high image density or fogging occurs but the problem cannot be solved by changing the density setting and performing special printing process. [Adjustment method]
- When fogging occurs, it may be eliminated by increasing the setting value.
- Increase the setting value to slightly lower the image density.
- Decrease the setting value to slightly increase the image density. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| CRG-BS-M |
Charging bias setting value (M) [When used]
Low/high image density or fogging occurs but the problem cannot be solved by changing the density setting and performing special printing process. [Adjustment method]
- When fogging occurs, it may be eliminated by increasing the setting value.
- Increase the setting value to slightly lower the image density.
- Decrease the setting value to slightly increase the image density. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| CRG-BS-C |
Charging bias setting value (C) [When used]
Low/high image density or fogging occurs but the problem cannot be solved by changing the density setting and performing special printing process. [Adjustment method]
- When fogging occurs, it may be eliminated by increasing the setting value.
- Increase the setting value to slightly lower the image density.
- Decrease the setting value to slightly increase the image density. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| CRG-BS-K |
Charging bias setting value (Bk) [When used]
Low/high image density or fogging occurs but the problem cannot be solved by changing the density setting and performing special printing process. [Adjustment method]
- When fogging occurs, it may be eliminated by increasing the setting value.
- Increase the setting value to slightly lower the image density.
- Decrease the setting value to slightly increase the image density. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| DEV-BS-Y |
Developing bias setting value (Y) [When used]
Low/high image density or fogging occurs but the problem cannot be eliminated by changing the density setting and performing special printing process.
[Adjustment method]
- Increase the setting value to increase the image density.
- Decrease the setting value to decrease the image density.
- When fogging occurs, it may be eliminated by decreasing the setting value. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| DEV-BS-M |
Developing bias setting value (M) [When used]
Low/high image density or fogging occurs but the problem cannot be eliminated by changing the density setting and performing special printing process.
[Adjustment method]
- Increase the setting value to increase the image density.
- Decrease the setting value to decrease the image density.
- When fogging occurs, it may be eliminated by decreasing the setting value. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| DEV-BS-C |
Developing bias setting value (C) [When used]
Low/high image density or fogging occurs but the problem cannot be eliminated by changing the density setting and performing special printing process.
[Adjustment method]
- Increase the setting value to increase the image density.
- Decrease the setting value to decrease the image density.
- When fogging occurs, it may be eliminated by decreasing the setting value. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| DEV-BS-K |
Developing bias setting value (Bk) [When used]
Low/high image density or fogging occurs but the problem cannot be eliminated by changing the density setting and performing special printing process.
[Adjustment method]
- Increase the setting value to increase the image density.
- Decrease the setting value to decrease the image density.
- When fogging occurs, it may be eliminated by decreasing the setting value. Setting range: -10 to 10 (Unit: 20V)
[Factory setting value/Value after RAM clearing: 0] |
| FRT-TS-Y |
Transfer bias front side setting value (Y) [When used]
An image failure occurs depending on the type or condition of the paper AND the problem cannot be eliminated by performing special printing process.
[Adjustment method]
- The problem may be eliminated by changing the setting value.
- Increase the setting value. (Effective for toner scatter/dotted image)
- Decrease the setting value. (Effective for white dots/white flower patches/image with high granularity in halftone mode) Setting range: -30 to 40 (Unit: 50V)
- It is preferable to enter values in the condition of "M <= C <= Y <= K". [Factory setting value/Value after RAM clearing: 0]
|