Canon imageCLASS MF5950dw
Service Mode. COPIER. DISPLAY
VERSION
COPIER > DISPLAY > VERSION | ||
---|---|---|
MAIN | Display of MAIN (main program) version | |
Details | To display the firmware version of Main Controller PCB. | |
Use case | When upgrading the firmware | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 00.00 to 99.99 | |
Default value | 0 | |
BOOT | Boot ROM version | |
Details | To display the version of Boot ROM (BOOT program). | |
Use case | When upgrading the firmware | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 00.01 to 99.99 | |
Default value | 0 | |
LANG | Language pack version | |
Details | To display the version of language pack. | |
Use case | When upgrading the firmware | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 00.00 to 99.99 | |
Default value | 0 | |
DEMODATA | Demo print data version | |
Details | To display the version of demo print data. Since this machine does not have demo print function, "FF.FF" is displayed. |
|
Use case | When upgrading the firmware | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 00.00 to 99.99 | |
Default value | 0 | |
ECONT | ECONT version | |
Details | To display the version of Engine Controller PCB. | |
Use case | When upgrading the firmware | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 00.00 to 99.99 | |
Default value | 0 | |
PANEL | PANEL version | |
Details | To display the version of PANEL. | |
Use case | When upgrading the firmware | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 00.00 to 99.99 | |
Default value | 0 | |
Related service mode | COPIER> FUNCTION> SYSTEM> PANEL-UP | |
BKUP | BKUP version | |
Details | To display the version of BKUP. | |
Use case | When upgrading the firmware | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 00.00 to 99.99 | |
Default value | 0 | |
Related service mode | COPIER> FUNCTION> SYSTEM> BKUP-UP |
ERR
Error code display screen
Up to 10 E codes and detailed codes for system errors can be shown.
JAM
Jam code display screen
Up to 10 Jam codes and detailed codes for system errors can be shown.
CCD
COPIER > DISPLAY > CCD | ||
---|---|---|
TARGET-B | Shading target value (B) | |
Details | To display the shading target value of Blue. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the CIS Unit. |
|
Use case | At scanned image failure | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 128 to 384 | |
Default value | 269 | |
Related service mode | COPIER> ADJUST> CCD> DFTAR-B | |
TARGET-G | Shading target value (G) | |
Details | To display the shading target value of Green. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the CIS Unit. |
|
Use case | At scanned image failure | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 128 to 384 | |
Default value | 270 | |
Related service mode | COPIER> ADJUST> CCD> DFTAR-G | |
TARGET-R | Shading target value (R) | |
Details | To display the shading target value of Red. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the CIS Unit. |
|
Use case | At scanned image failure | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 128 to 384 | |
Default value | 263 | |
Related service mode | COPIER> ADJUST> CCD> DFTAR-R | |
TARGETBW | Shading target value (B&W) | |
Details | To display the shading target value at B&W jobs. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the Main Controller PCB. |
|
Use case | At scanned image failure | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 128 to 384 | |
Default value | 276 | |
Related service mode | COPIER> ADJUST> CCD> DFTAR-BW |