Canon imageCLASS MF232w
Service Mode. COPIER. FUNCTION 1
CLEAR
COPIER > FUNCTION > CLEAR | ||||
---|---|---|---|---|
Sub item | Item | Description | FAX model |
Other |
TEL-USER | Clear the user data and the registered address data. SSSW is not cleared. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted. |
Yes | Yes | |
SRVC-DAT | SERVICE DATA is cleared. User data is not cleared. | Yes | Yes | |
HIST | ACT-HIST | Communication log is cleared. | Yes | No |
ACC-HIST | Each print log is cleared. | Yes | Yes | |
JAM-HIST | JAM log is cleared. | Yes | Yes | |
ERR-HIST | Error(E code) log is cleared. | Yes | Yes | |
PWD-CLEAR | Password of the system administrator is cleared. | Yes | Yes | |
ALL | The following data are cleared.
When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted. |
Yes | Yes |
MISC-R
COPIER > FUNCTION > MISC-R | ||
---|---|---|
Sub item | Description | Common to all models |
SCANLAMP | Execution of lighting function for Scanning Lamp. (CIS LED R -> G -> B -> W -> OFF) | Yes |
MISC-P
OUTPUT
When outputting the report, place paper in the Pickup Cassette, and remove paper from the Multi-purpose Tray.
If paper is placed in the Multi-purpose Tray, the report is not output even if paper is placed in the Pickup Cassette.
COPIER > FUNCTION > MISC-P | |||
---|---|---|---|
Sub item | Description | FAX model |
Other |
SRVC-DAT | To output the system data list/ system dump list as follows; | Yes | No |
SYS-DAT | To output the system data list. Service software switches and parameters used in FAX function are mainly out- putted. |
Yes | No |
SYS-DMP | To output the system dump list. Service data such as the number of communications, the number of receiving pages and sending pages, and the number of error are outputted. |
Yes | No |
CNTR | To output the counter report. Counter values of use trend for reading, storage, communications, and copy are displayed. |
Yes | Yes |
SPEC | To output the spec report. Current device status is printed out. |
Yes | Yes |
KEY-HIST | Output of the key log report To output the key log up to the time the transmission task was input (the [START] key was pressed). |
Yes | No |