Canon iRC5880N
Service Mode 01. How to Enter
Entering or selecting service modes
If you want to execute a machine operation using a service mode item, be sure to disconnect all cables from an external controller or a network before starting service mode. Particularly, if you are using a FUNCTION (operation/inspection) mode item, the arrival of a print job from an external source can cause the machine to malfunction, leading to damage.
- Press the asterisk key "✽" on the control panel.
- Press the 2 and 8 keys of the keypad at the same time.
- Press the asterisk key "✽" on the control panel.
Exiting service modes
A press on the Reset key will bring back the Service Mode Initial screen.
Another press on the Reset key will end service mode, and bring back the User screen (standard screen).
If you used service mode (ADJUST, FUNCTION, OPTION), be sure to turn off and then on the main power switch after ending service mode.