Canon iRC5880N

Troubleshooting. Jam Codes ADF-related

Jam Code (ADF-related)

Code	Sensor	Sensor	Description
0001	post-separation sensor	PI7	The post separation sensor does not detect paper even when paper has been fed 452 mm after the start of separation.
0002	post-separation sensor	PI7	the separation sensor detects paper after paper has been fed 50 mm (if extra length, +200 mm) -45.5 mm following registration pickup. the sensor goes on (paper with hole) before paper has been fed 12 mm after the detection of the trailing edge; the separation sensor detects paper after paper has been fed 50 mm from when the separation senor has gone on.
0003	registration sensor	PI1	the registration sensor does not detect paper even when paper has been fed 134.8 mm after the post-separation sensor has gone on.
0004	registration sensor	PI1	the read sensor goes off before the registration sensor goes off.
0005	read sensor	PI8	the read sensor does not detect paper when paper has been fed 364.2 mm (182.1 x 2) after the point of registration. the read sensor does not detect paper even when paper has been fed 157.4 mm (78.7 x 2) from the point of No. 2 registration.
0006	read sensor	PI8	the read sensor detects paper when paper has been fed 500 mm (if extra length, +200 mm) from the start of feed following a temporary stop before reading. in the course of LTRR/LGL identification in mix mode, the read sensor detects paper when paper has been fed 514 mm beginning at the advance edging standby position.
0007	delivery reversal sensor	PI9	at time of switchback, the delivery sensor does not detect paper when paper has been fed 50 mm from the start of feed. at time of switch-back, the delivery sensor does not detect paper after paper has been fed 50 mm from the start of feed.
0008	delivery reversal sensor	PI9	delivery reversal sensor the delivery sensor detects paper after paper has been fed 161.9 mm from the end of reading the trailing edge.
0042	post-separation sensor	PI7	a jam (1st sheet) is detected by the post-separation sensor.
0043	registration sensor	PI1	paper (1st sheet) fails to reach the registration sensor.
0044	registration sensor	PI1	a stationary jam (1st sheets) is detected by the registration sensor.
0045	read sensor	PI8	paper (1st sheet) fails to reach the read sensor.
0046	read sensor	PI8	a stationary jam (1st sheet) is detected by the read sensor.
0047	delivery reversal sensor	PI9	paper (1st sheet) fails to reach the delivery sensor.
0048	delivery reversal sensor	PI9	a stationary jam (1st sheet) is detected by the delivery sensor.
0071	timing fault	-	timing of software operation is faulty.
0073	timing fault	-	the shift motor has a fault.
0090	ADF open/closed sensor 1	PS502	the ADF is opened while the machine is in operation.
0091	ADF open/closed sensor 1	PS502	the ADF is opened while the machine is in operation (waiting for paper).
0092	DF cover open/closed sensor	PI6	the cover is opened while the machine is in operation (drive system in operation).
0093	DF cover open/closed sensor	PI6	the cover is opened while the machine is in operation (waiting for paper).
0094	registration sensor, separation sensor, feed sensor, delivery reversal sensor	PI1,PI7,PI8,PI9	paper is detected within the path during pickup of the 1st sheet.
0095	original placement sensor, DF cover open/closed sensor, ADF open/closed sensor 1	PI5,PI6,PS502	there is no paper in the tray, or the pickup start signal is received with the machine being in an open state.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home

Email:
Password:

New Register	Forgot Password?