Canon iRC5030i
Troubleshooting. Jam Code. Main Unit 2
ACC ID | Jam Code | Type | Sensor Name | Sensor ID |
---|---|---|---|---|
00 | 0108 | Delay jam | First delivery sensor | PS41 |
00 | 0208 | Stationary jam | First delivery sensor | PS41 |
00 | 0A08 | POWER ON | First delivery sensor | PS41 |
00 | FF08 | Sequence jam *2 | First delivery sensor | PS41 |
00 | 0109 | Delay jam | Second delivery sensor | PS42 |
00 | 0209 | Stationary jam | Second delivery sensor | PS42 |
00 | 0A09 | POWER ON | Second delivery sensor | PS42 |
00 | FF09 | Sequence jam *2 | Second delivery sensor | PS42 |
00 | 010B | Delay jam | Third delivery sensor | PS43 |
00 | 020B | Stationary jam | Third delivery sensor | PS43 |
00 | 0A0B | POWER ON | Third delivery sensor | PS43 |
00 | FF0B | Sequence jam *2 | Third delivery sensor | PS43 |
00 | 0A01 | POWER ON | Cassette 1 pre-registration sensor | PS55 |
00 | FF01 | Sequence jam *2 | Cassette 1 pre-registration sensor | PS55 |
00 | 0102 | Delay jam | Cassette 2 pre-registration sensor | PS56 |
00 | 0202 | Stationary jam | Cassette 2 pre-registration sensor | PS56 |
00 | 0A02 | POWER ON | Cassette 2 pre-registration sensor | PS56 |
00 | FF02 | Sequence jam *2 | Cassette 2 pre-registration sensor | PS56 |
00 | 010F | Delay jam | Deck pickup sensor | PS6D |
00 | 0111 | Delay jam | Buffer pass entrance sensor | PS1 |
00 | 0112 | Delay jam | Buffer pass exit sensor | PS2 |
00 | 020F | Stationary jam | Deck pickup sensor | PS6D |
00 | 0211 | Stationary jam | Buffer pass entrance sensor | PS1 |
00 | 0212 | Stationary jam | Buffer pass exit sensor | PS2 |
00 | 0A0F | POWER ON | Deck pickup sensor | PS6D |
00 | 0A11 | POWER ON | Buffer pass entrancee sensor | PS1 |
00 | 0A12 | POWER ON | Buffer pass exit sensor | PS2 |
00 | FF0F | Sequence jam *2 | Deck pickup sensor | PS6D |
00 | FF11 | Sequence jam *2 | Buffer pass entrance sensor | PS1 |
00 | FF12 | Sequence jam *2 | Buffer pass exit sensor | PS2 |
00 | 0103 | Delay jam | Cassette 3 pre-registration sensor | PS8 |
00 | 0203 | Stationary jam | Cassette 3 pre-registration sensor | PS8 |
00 | 0A03 | POWER ON | Cassette 3 pre-registration sensor | PS8 |
00 | FF03 | Sequence jam *2 | Cassette 3 pre-registration sensor | PS8 |
00 | 0104 | Delay jam | Cassette 4 pre-registration sensor | PS9 |
00 | 0204 | Stationary jam | Cassette 4 pre-registration sensor | PS9 |
00 | 0A04 | POWER ON | Cassette 4 pre-registration sensor | PS9 |
00 | FF04 | Sequence jam *2 | Cassette 4 pre-registration sensor | PS9 |
00 | 0CA6 | Error *1 | Recovered by opening and closing the Door | - |
00 | 0CF1 | Error *1 | Recovered by opening and closing the Door | - |
00 | 1F01 | Sequence jam *2 | Recovered by opening and closing the Door | - |
00 | 0D91 | Different media length | Different media length | - |
00 | 0D92 | Incorrect paper | Transparency sensor | UN51 |
00 | 0D93 | Incorrect paper | Transparency sensor | UN51 |
00 | 0113 | Delay jam | Vertical path sensor | UN53 |
00 | 0213 | Stationary jam | Vertical path sensor | UN53 |
00 | FF13 | Sequence jam *2 | Vertical path sensor | UN53 |
00 | FF90 | Sequence jam *3 | Communication sequence error with Finisher | - |
00 | FFXX | Sequence jam *2 | Recovered by opening and closing the Door | - |
*1 The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If the same jam is detected regardless of the operation above, the error code is displayed.
*2: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If it is not recovered by the above operation, it is considered an error near the target sensor. Disconnect and then connect the connectors around the target sensor, check if the cable is open circuit, and replace the sensor.
*3: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If it is not recovered by the above operation, operation failure of the Finisher (including error in the harness) is suspected as a cause.