Canon iRC1225
Service Mode. COPIER. DISPLAY. 6 CCD, DPOT
CCD
| COPIER> DISPLAY> CCD | ||
|---|---|---|
| TARGET-B | Shading target value (B) | |
| Details | To display the shading target value of Blue. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the White Plate data. |
|
| Use case | When the scanned image failure occurs | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 0 to 2048 | |
| Appropriate target value | 512 - 2047 | |
| TARGET-G | Shading target value (G) | |
| Details | To display the target value of Green. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the White Plate data. |
|
| Use case | When the scanned image failure occurs | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 0 to 2048 | |
| Appropriate target value | 512 - 2047 | |
| TARGET-R | Shading target value (R) | |
| Details | To display the shading target value of Red. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the White Plate data. |
|
| Use case | When the scanned image failure occurs | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 0 to 2048 | |
| Appropriate target value | 512 - 2047 | |
DPOT
| COPIER> DISPLAY> DPOT | |
|---|---|
| 2TR-PPR | Dspl of sec trns ATVC ppr allotted voltg |
| Details | To display the paper allotted voltage set by the latest secondary transfer ATVC control. The appropriate range may be exceeded due to wrong media setting. |
| Use case | When transfer failure occurs on certain media |
| Adj/set/operate method | N/A (Display only) |
| Display/adj/set range | 0 to 5000 |
| Unit | 1 V |
| 2TR-BASE | Dspl of sec transfer ATVC base voltage |
| Details | To display the base voltage set by the latest secondary transfer ATVC control. The appropriate range may be exceeded due to wrong media setting. |
| Use case | When transfer failure occurs on certain media |
| Adj/set/operate method | N/A (Display only) |
| Display/adj/set range | 0 to 6000 |
| Unit | 1 V |
| Appropriate target value | 500 - 5000 |
| 1TR-DC-Y | Dspl of primary transfer voltage (Y) |
| Details | To display the voltage lastly applied to the Primary Transfer Roller (Y). |
| Use case | When transfer failure occurs due to the primary transfer |
| Adj/set/operate method | N/A (Display only) |
| Display/adj/set range | 0 to 5000 |
| Unit | 1 V |
| Appropriate target value | 50 - 2000 |
| 1TR-DC-M | Dspl of primary transfer voltage (M) |
| Details | To display the voltage lastly applied to the Primary Transfer Roller (M). |
| Use case | When transfer failure occurs due to the primary transfer |
| Adj/set/operate method | N/A (Display only) |
| Display/adj/set range | 0 to 5000 |
| Unit | 1 V |
| Appropriate target value | 50 - 2000 |
| 1TR-DC-C | Dspl of primary transfer voltage (C) |
| Details | To display the voltage lastly applied to the Primary Transfer Roller (C). |
| Use case | When transfer failure occurs due to the primary transfer |
| Adj/set/operate method | N/A (Display only) |
| Display/adj/set range | 0 to 5000 |
| Unit | 1 V |
| riate target value | 50 - 2000 |