Canon iR4035
Troubleshooting. Alarm Code 2
Alarm Code | Title | A. movement /B. cause /C. measures | ||
---|---|---|---|---|
33 | - | 0011 | Fixing Film Edge Cooling Fan error | Movement: No change. CAUSE: Disconnection of the Fixing Film Edge Cooling Fans (FAN1/2) or Failure of the Fixing Film Edge Cooling Fans (FAN1/2) Measure: Check the connector. -> Replace the Fixing Film Edge Cooling Fans (FAN1/2). |
37 | - | 0001 | For R&D | For R&D |
37 | - | 0002 | For R&D | For R&D |
37 | - | 0003 | For R&D | For R&D |
37 | - | 0004 | For R&D | For R&D |
37 | - | 0005 | For R&D | For R&D |
37 | - | 0006 | For R&D | For R&D |
37 | - | 0007 | For R&D | For R&D |
37 | - | 1000 | For R&D | For R&D |
37 | - | 2000 | For R&D | For R&D |
38 | - | 0001 | For R&D | For R&D |
38 | - | 0002 | For R&D | For R&D |
50 | - | 0010 | Alarm due to original separation failure | Movement: Nothing in particular. Cause: Condition unable to separate 1st sheet of original from the ADF occurs 3 times. Measures: Check rotation of the Pickup Motor (M1) -> Check the life of the Pickup Roller -> Check if paper lint is at the Pickup Slot. |
50 | - | 0012 | Feed Motor Fan alarm | Movement: No change. CAUSE: Disconnection of the ADF Exhaust Fan (FM1) or the failure of ADF Exhaust Fan (FM1) Measures: Check the connector -> Replace the ADF Exhaust Fan (FM1) |
61 | - | 0001 | Finisher Staple alarm | Movement: A user message is displayed on the Control Panel. If staple job is being processed during a print job, printing is stopped. Measures: Load staples. |
62 | - | 0001 | Saddle Staple alarm | Movement: A user message is displayed on the Control Panel, and printing is stopped. If staple job is being processed during a print job, printing is stopped. Measures: Load staples. |
65 | - | 0001 | Punch alarm | Movement: A user message is displayed on the Control Panel. If punching is being operated during a print job, operation varies depending on the detection level.
|
73 | - | 0006 | LIPS | Error in configuration acquisition/management |
73 | - | 0007 | LIPS | Memory management error in LIPS |
73 | - | 0008 | LIPS | File management error in LIPS |
Alarm Code | Title | A. movement /B. cause /C. measures | ||
73 | - | 0009 | LIPS | Reception data management error |
73 | - | 0011 | LIPS | Macro management error |
73 | - | 0014 | LIPS | Font management error |
73 | - | 0015 | LIPS | Letter drawing error |
73 | - | 0017 | LIPS | Image drawing error |
73 | - | 0021 | LIPS | Utility execution control error |
73 | - | 0024 | LIPS | Boot error in LIPS |
73 | - | 0026 | LIPS | Data format error of image mode |
75 | - | 0001 | Error occurred in Yukon | - |
75 | - | 0002 | Error occurred due to invalid SVG analysis from Yukon | - |
76 | - | 0001 | Font | No memory for internal font |
76 | - | 0002 | Font | Fails to access to the file that stores the font. |
76 | - | 0003 | Font | Fails to allocate the FM work memory. |
76 | - | 0004 | Font | Fails to allocate the FM work memory. |
76 | - | 0005 | Font | Fails to analyze the internal font. |
76 | - | 0006 | Font | Alignment of font data is wrong. |
76 | - | 0007 | Font | Fails to allocate work memory with scalar. There are 3 types depending on where to occur. |
76 | - | 0008 | Font | Fails to allocate work memory with scalar. There are 3 types depending on where to occur. |
78 | - | 0003 | GL | Invalid GL entry |
78 | - | 0005 | GL | System memory full |