Canon iR1435i
Adjustment. Actions when Replacing the Copyboard Glass Unit 1
Entering White Level Data of the Standard White Plate
- Select following service mode.
• COPIER> ADJUST> CCD> W-PLT-X/Y/Z - Enter the value from the barcode label on the Copyboard Glass.
Automatic Gain Offset Adjustment for the CIS unit
- Rewrite "1000" for the setting value on following service mode.
• COPIER >ADJUST > CCD > LED-BW-R, BW-G, BW-B = 1000 - Rewrite "1000" for the setting value on following service mode.
• COPIER >ADJUST > CCD > LED-CL-R, CL-G, CL-B = 1100 - Select following service mode.
• COPIER > FUNCTION > CCD > CL-AGC, BW-AGC - Press OK key and then the automatic adjustment is executed. After the automatic adjustment, "executing" disappears.
- Check the setting value is changed. When it is not changed, readjust from procedure 1) to 4).
Adjustment of Image Reading Start Position
CAUTION:
After the setting value is changed, write the changed value on the service label.
- Enter "-20" for the setting value on following service mode
• COPIER > ADJUST > ADJ-XY >STRD-POS = -20 - Select following service mode.
• COPIER >FUNCTION > INSTALL > STRD-POS - Press OK key and then the automatic adjustment is executed. After the automatic adjustment, "executing" disappears.
- Check the setting value is changed. When it is not changed, readjust from procedure 1) to 4).