Canon iR1133A
Service Mode. FEED-ADJ 1
ADJ-C1
Cassette1 write start pstn in horz scan
| Details | To adjust the image write start position in the horizontal scanning direction when picking up paper from the Cassette 1 (standard Pickup Cassette). As the value is incremented by 1, the margin on the left edge of paper is increased by 0.25 mm. +: Left margin becomes larger (An image moves to the right.) -: Left margin becomes smaller (An image moves to the left.) When replacing the Main Controller PCB, enter the value of service label. |
| Use case | When replacing the Main Controller PCB |
| Adj/set/operate method | 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key. 2) Turn OFF/ON the main power switch. |
| Display/adj/set range | -9 to 9 (-2.22 to +2.22 mm) |
| Unit | Approx. 0.25 mm |
| Default value | -2 |
ADJ-C2
Cassette2 write start pstn in horz scan
| Details | To adjust the image write start position in the horizontal scanning direction when picking up paper from the Cassette 2 (option Pickup Cassette). As the value is incremented by 1, the margin on the left edge of paper is increased by 0.25 mm. +: Left margin becomes larger (An image moves to the right.) -: Left margin becomes smaller (An image moves to the left.) When replacing the Main Controller PCB, enter the value of service label. |
| Use case | When replacing the Main Controller PCB |
| Adj/set/operate method | 1) Enter the setting value (switch negative/positive by -/+ key) and press OK key. 2) Turn OFF/ON the main power switch. |
| Display/adj/set range | -9 to 9 (-2.22 to +2.22 mm) |
| Unit | Approx. 0.25 mm |
| Default value | -4 |