Canon iR Advance C9280 Pro
Troubleshooting. Jam Code. Main Unit 3
| ACC ID | Jam Code | Type | Sensor Name / Description | Sensor ID |
|---|---|---|---|---|
| 00 | 0A0A | POWER ON | Vertical Path Merging Sensor | PS30 |
| 00 | 0A0B | POWER ON | Transparency Sensor | PS29 |
| 00 | 0A0C | POWER ON | Registration Sensor | PS28 |
| 00 | 0A0D | POWER ON | Post-secondary Transfer Sensor | PS23 |
| 00 | 0A0E | POWER ON | Fixing Inlet Sensor | PS70 |
| 00 | 0A10 | POWER ON | Fixing Inner Delivery Sensor | PS75 |
| 00 | 0A11 | POWER ON | Outer Delivery Sensor | PS31 |
| 00 | 0A12 | POWER ON | Reverse Sensor | PS32 |
| 00 | 0A13 | POWER ON | Reverse Vertical Path Sensor 1 | PS33 |
| 00 | 0A14 | POWER ON | Reverse Vertical Path Sensor 2 | PS34 |
| 00 | 0A15 | POWER ON | Reverse Vertical Path Sensor 3 | PS35 |
| 00 | 0A16 | POWER ON | Duplex Sensor 1 | PS24 |
| 00 | 0A17 | POWER ON | Duplex Sensor 2 | PS25 |
| 00 | 0A18 | POWER ON | Duplex Sensor 3 | PS26 |
| 00 | 0A19 | POWER ON | Duplex Sensor 4 | PS27 |
| 00 | 0A30 | POWER ON | Outer Delivery Transparency Sensor | PS111 |
| 00 | 0B00 | OTHER | Waste Toner Container Sensor (Check that the Waste Toner Container is installed.) | PS112 |
| 00 | 0B01 | COVER OP | Front Cover Sensor | PS80 |
| 00 | 0B02 | COVER OP | Multi-purpose Tray Cover Sensor | PS79 |
| 00 | 0B03 | COVER OP | Lower Right Cover Sensor | PS39 |
| 00 | 0B04 | COVER OP | Lower Left Cover Sensor | PS36 |
| 00 | 0B05 | COVER OP | Buffer Front Cover Sensor | PS87 |
| 00 | 0B06 | COVER OP | Deck Left Front Cover Sensor | S006 |
| 00 | 0C00 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA0 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA2 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA3 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA4 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA5 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA6 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA7 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA8 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CA9 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0CAF | OTHER | Finisher sequence error jam | ---- |
| 00 | 0CF1 | ERROR*1 | Recovered by opening and closing the Door | ---- |
| 00 | 0D91 | MEDIA NG | Misprint (paper length is short) | LENGTH NG |
| 00 | 0D92 | MEDIA NG | Misprint (Although transparency setting is set, paper other than transparency is fed) | OHP NG |
| 00 | 0D93 | MEDIA NG | Misprint (Although transparency setting is not set, transparency is fed) | MEDIA NG |
| 00 | 1E00 | OTHER | Finisher sequence error jam | OTHER |
*1 The state is recovered by opening and closing the Door, or turning OFF and then ON the
power supply.
If the same jam is detected although the above operation is performed, an error code will
be notified.