Canon iR Advance C5035
Troubleshooting. Alarm Code 1
| Location of Trouble | Alarm Code | Description | Details | |
|---|---|---|---|---|
| 00 | - | 0246 | Error code display (4-digit) | Soft counter PCB cannot write normally. |
| 00 | - | 0247 | Error code display (4-digit) | Soft counter PCB cannot restore data. |
| 02 | - | 0020 | Front face DADF dust correction occurs | SET: In case that 'DADF dust correction with the front face roller during DADF paper interval" is enabled. |
| 02 | - | 0021 | Reverse face DADF dust correction occurs | SET: In case that 'DADF dust correction with the reverse face roller during DADF paper interval" is enabled. |
| 02 | - | 0022 | Insufficient LED light intensity error in front scanner | In case the light intensity is insufficient when LED lighting |
| 02 | - | 0023 | Insufficient LED light intensity error in back scanner | In case the light intensity is insufficient when LED lighting |
| 04 | - | 0008 | Optional deck lifter error | - |
| 09 | - | 0001 | Drum life (Y) | - |
| 09 | - | 0002 | Drum life (M) | - |
| 09 | - | 0003 | Drum life (C) | - |
| 09 | - | 0004 | Drum life (K) | - |
| 10 | - | 0001 | No toner (Bk) (RDS creates) | - |
| 10 | - | 0002 | No toner (Cy) (RDS creates) | - |
| 10 | - | 0003 | No toner (M) (RDS creates) | - |
| 10 | - | 0004 | No toner (Ye) (RDS creates) | - |
| 11 | - | 0001 | Waste toner alarm | Detected waste toner bottle full. |
| 11 | - | 0011 | Near-full state of the Waste Toner Container | Detection of near-full state of the Waste Toner Container |
| 31 | - | 0006 | HDD failure when equipped with the mirroring function | HDD failure when equipped with the mirroring function |
| 33 | - | 0010 | Scanner Unit Exhaust Fan (FM3) alarm | The fan rotation signal cannot be detected after 3 seconds have passed since the Scanner Unit Exhaust Fan (FM2) of the Reader is turned ON. Check the connector connection -> Replace the Scanner Unit Exhaust Fan (FM2). |
| 33 | - | 0011 | Fixing exhaust fan alarm | SET: In case the fan abnormality occurred during a job. RESET: In case the fan operates normally during a job |
| 33 | - | 0022 | Read Motor Cooling Fan (FM1) alarm | The fan rotation signal cannot be detected after 3 seconds have passed since the Read Motor Cooling Fan (FM1) is turned ON. Check the connector connection -> Replace the Read Motor Cooling Fan (FM1). |
| 33 | - | 0023 | Scanner Unit (DADF) Cooling Fan (FM3) alarm | The fan rotation signal cannot be detected after 3 seconds have passed since the Scanner Unit (DADF) Cooling Fan (FM3) is turned ON. Check the connector connection -> Replace the Scanner Unit (DADF) Cooling Fan (FM3). |
| 33 | - | 0025 | Scanner Unit (Reader) Cooling Fan (FM1) alarm | The fan rotation signal cannot be detected after 3 seconds have passed since the Scanner Unit (Reader) Cooling Fan (FM1) is turned ON. Check the connector connection -> Replace the Scanner Unit (Reader) Cooling Fan (FM1). |
| 34 | - | 0002 | Auto registration adjustment | Abnormal data occurred on more or equal to 8 out of 10 sets of auto registration pattern. Dirt on the belt and scratches were wrongly detected as a pattern and discrepancy in reading data occurred as the result. |
| 34 | - | 0003 | Auto registration adjustment | Timeout occurred due to unsuccess in reading 10 sets of auto registration pattern. Registration detection sensor failure, Registration detection sensor cleaning member covered the registration detection sensor, or no image drew on the belt. |
| 37 | - | 0001 | For R&D | For R&D |
| 37 | - | 0002 | For R&D | For R&D |
| 37 | - | 0003 | For R&D | For R&D |
| 37 | - | 0004 | For R&D | For R&D |
| 37 | - | 0005 | For R&D | For R&D |
| 37 | - | 0006 | For R&D | For R&D |
| 37 | - | 0007 | For R&D | For R&D |
| 37 | - | 1000 | For R&D | For R&D |
| 37 | - | 2000 | For R&D | For R&D |
| 38 | - | 0001 | For R&D | For R&D |
| 38 | - | 0002 | For R&D | For R&D |
| 50 | - | 0007 | Insufficient light intensity in Post-separation Sensor 3 (PCB2) | Clean the Post-separation Sensor 3 (PCB2) if light intensity is insufficient when adjusting output of the sensor. |