PrintCopy.info service

Canon iR Advance C250iF

 All About this machine
Table Of Contents 

Troubleshooting. Alarm Code 3

Location
Code		 Alarm
Code		 Description Details
10 0018 Toner (M) prior delivery
alarm		 An alarm for requesting a prior delivery is sent to UGW as the value of Toner level detect value has reached the value set in COPIER > OPTION > FNC- SW > T-DLV-CL.
10 0019 Toner (C) prior delivery
alarm		 An alarm for requesting a prior delivery is sent to UGW as the value of Toner level detect value has reached the value set in COPIER > OPTION > FNC- SW > T-DLV-CL.
10 0020 Toner (Bk) prior delivery
alarm		 An alarm for requesting a prior delivery is sent to UGW as the value of Toner level detect value has reached the value set in COPIER > OPTION > FNC- SW > T-DLV-BK.
10 0022 Patch detection light intensity abnormal change alarm  
10 0100 Toner bottle replacement completion alarm The replacement of the Toner Container was detected.
10 0201 Toner Container (Y) level
detection error		 -
10 0202 Toner Container (M) level
detection error		 -
10 0203 Toner Container (C) level
detection error		 -
10 0204 Toner Container (Bk) level
detection error		 -
11 0001 Waste Toner Container full level "Movement: A message ""The waste toner container is full."" is displayed on the Control Panel, and the machine is stopped.
Cause: The Waste Toner Counter reaches full. Measures: Replace the Waste Toner Container."
11 0010 Display of Waste Toner Container preparation warning "Movement: A message is displayed on the Control Panel. (Continuous printing is enabled.)
Cause: Display of Waste Toner Box preparation warning"
Location
Code		 Alarm
Code		 Description Details
30 0021 Tried to apply abnormally great primary transfer voltage at primary transfer ATVC control for yellow. Error in the Primary Transfer High Voltage PCB, Error in the Primary Transfer Roller (ITB Unit)
  1. Check failure of the harness between the Primary Transfer High Voltage PCB and the DC Controller PCB (open circuit, trapped cable, connector disconnection). -> Replace the harness if it is faulty
  2. Check connection failure between the Primary Transfer High Voltage PCB and the Primary Transfer Roller (Check that the connection is free from open circuit or GND contact)
  3. Replace the Primary Transfer High Voltage PCB
  4. Replace the ITB Unit
  5. Replace the DC Controller PCB
30 0022 Tried to apply abnormally great primary transfer voltage at primary transfer ATVC control for magenta. Error in the Primary Transfer High Voltage PCB, Error in the Primary Transfer Roller (ITB Unit)
  1. Check failure of the harness between the Primary Transfer High Voltage PCB and the DC Controller PCB (open circuit, trapped cable, connector disconnection). -> Replace the harness if it is faulty
  2. Check connection failure between the Primary Transfer High Voltage PCB and the Primary Transfer Roller (Check that the connection is free from open circuit or GND contact)
  3. Replace the Primary Transfer High Voltage PCB
  4. Replace the ITB Unit
  5. Replace the DC Controller PCB
30 0023 Tried to apply abnormally great primary transfer voltage at primary transfer ATVC control for cyan. Error in the Primary Transfer High Voltage PCB, Error in the Primary Transfer Roller (ITB Unit)
  1. Check failure of the harness between the Primary Transfer High Voltage PCB and the DC Controller PCB (open circuit, trapped cable, connector disconnection). -> Replace the harness if it is faulty
  2. Check connection failure between the Primary Transfer High Voltage PCB and the Primary Transfer Roller (Check that the connection is free from open circuit or GND contact)
  3. Replace the Primary Transfer High Voltage PCB
  4. Replace the ITB Unit
  5. Replace the DC Controller PCB
   
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us