Canon iR Advance C250iF
Troubleshooting. Jam Code. Detailed 4 ADF
| ACCID | Jam Code | Type | Sensor Name | Sensor ID | Jam description | I/O | |||
|---|---|---|---|---|---|---|---|---|---|
| Address | bit | Remarks | |||||||
| 01 | 0001 | Delay | Document End Sensor | PS02 | Description | When the Document End Sensor (PS02) does not detect the paper although a specified period of time has passed since the Document Sensor (PS03) detected the paper. | P001 | 0 | 1:paper |
| 0002 | Stationary | Document End Sensor | PS02 | Description | When the Feed Path Sensor (S2) is not turned OFF although a specified period of time has passed since the Document End Sensor (PS02) detected the paper. | P001 | 0 | 1:paper | |
| 0004 | Delay (at the time of reversing) |
Document End Sensor | PS02 | Description | When the Document End Sensor (PS02) does not detect the paper although a specified period of time has passed since the Document Sensor (PS03) detected the paper after reversing. | P001 | 0 | 1:paper | |
| 0005 | Stationary (at the time of reversing) | Document End Sensor | PS02 | Description | When the Feed Path Sensor (S2) is not turned OFF although a specified period of time has passed since the Document End Sensor (PS02) detected the paper after reversing. | P001 | 0 | 1:paper | |
| 0021 | Timing | Document End Sensor | PS02 | Description | At 1-sided or 2-sided printing, the leading edge of the paper failed to be detected because it arrived the Document End Sensor (PS02) before the specified period of time passes. | P001 | 0 | 1:paper | |
| 0071 | Timing Error | Timing Error Jam | Description | An error occurred in the software sequence for some reasons. The error may be cleared by placing the paper on the Original Tray. |
- | - | |||
| 0094 | Power-on | Document End Sensor | PS02 | Description | When the Document End Sensor (PS02) detects the paper at power-on. | P001 | 0 | 1:paper | |
| Document Sensor | PS03 | Description | When the Document Sensor (PS03) detects the paper at power-on. | P001 | 1 | 1:paper | |||
| 0096 | Limited function mode |
DF Job Error Jam | Description | If an error occurs for some reasons, a jam message is displayed to prompt the user to perform jam removal. After that, an error is displayed, and the device enters limited functions mode. The machine recovers when the cause of the error is solved. | |||||